<p>These are the current command line arguments that can be fed to the receiver:<br /> usage: [-c] [-v] [-gr] [-gi] [-w] [-x] [-s] [-gn3s]</p> <h2>[-c] log high rate channel data</h2> <p>This will log the raw channel data (correlations, <span class="caps">NCO</span> feedback, etc) to a log file that can then be inspected with the script ./matlab/plot_chan.m Useful for tuning/changing the tracking loop behavior.</p> <h2>[-v] be verbose</h2> <p>Output more startup/shutdown info.</p> <h2>[-gr] <gain> set rf gain in dB (<span class="caps">DBS</span>-RX only)</h2> <p>Manually set <span class="caps">DBS</span>-RX RF gain.</p> <h2>[-gi] <gain> set if gain in dB (<span class="caps">DBS</span>-RX only)</h2> <p>Manually set <span class="caps">DBS</span>-RX IF gain.</p> <h2>[-w] <bandwidth> bandwidth of lowpass filter</h2> <p>Adjust bandwidth of <span class="caps">DBS</span>-RX&#8217;s integrated filter.</p> <h2>[-x] the <span class="caps">USRP</span> samples at a modified 65.536 MHz (default is 64 MHz)</h2> <p>If the <span class="caps">USRP</span> is clocked at 65.536 MHz, use this option to properly sample the data.</p> <h2>[-s] output over /dev/ttyS0 instead of the named pipe</h2> <p>Dump telemetry over first serial port on computer.</p> <h2>[-gn3s] use the <span class="caps">SIGE</span> GN3S sampling device</h2> <p>Use this if you have a GN3S instead of a <span class="caps">USRP</span> w/ <span class="caps">DBS</span>-RX daughtercard.</p> 2009-11-27T01:37:53-08:00 277432 runtime-options 16636 2009-07-29T06:02:50-07:00 9811